3/8" High Pressure Ball Valve DN10 Kit with Brass Socket & Steel Plug FUEL PUMP PARTS 47" Molded Grip Zinc Plated

47" Molded Grip Zinc Plated Steel  Lance ST007 5800 PSI

If you have a 3-6 GPM pressure washer plumbed to a horizontal leg tank look for (SKU# PL-4-TA) or if plumbing to an IBC tote looks for (SKU# PL-4-TO)

Flow through design requires pressure washer to be off after use

5 gallons per minute at 60 psi powered by a deep cycle marine battery

expressed or implied

3/8" High Pressure Ball Valve DN10 Kit with Brass Socket & Steel Plug FUEL PUMP PARTS 47" Molded Grip Zinc Plated3 8" High pressure ball valve DN10 kit w brass socket & steel plug: The brass socket and steel plug are not installed on the ball valve. Use medium thread lock to install the quick connect fittings. 3 8" pressure washing ball valve 3050 psi F nickel plated brass compact design rated to only 176 degrees maximum Fahrenheit Favorite among pressure washers due to the compact handle not catching up on plants, roots, etc. when reeling pulling hose in upon