AMAGIC Textile Heat Press Foil - Orange EB - 12.5" x - 200' Grease Remover Thanks to a proprietary magnetic

Thanks to a proprietary magnetic auto-open mechanism

Thinner coats are usually desirable on higher mesh count (200 and above) for half-tones and finer detail like 4-color process where thicker coats are usually used for spot color on lower mesh counts (below 200)

With this version of the Heat Press Caddie

(Requires air compressor

Stand included (except 23" x 33" model)

AMAGIC Textile Heat Press Foil - Orange EB - 12.5" x - 200' Grease Remover Thanks to a proprietary magneticApplication Settings: Temperature: Stay under 320F Pressure: Medium Firm Dwell Time: 8 15 seconds Note about temperature: foil does not need temperature to work. Foil will transfer cold to packaging tape because the tape is tacky. The adhesive needs the temperature and time to become tacky. Check with your adhesive manufacturer for proper settings. However too much heat can damage the foil color and release capabilities. Avoid high heat. Screen print