Boost Gauge Adaptor for Peugeot, MINI, Citroen and Renault Volkswagen > Caddy > All which would often not perform

which would often not perform correctly

This kit is compatible with pre 2015 cars fitted with the bolt on type induction sensor located on the intake pipework next to the airbox as shown below:

If you have any questions or are unsure if this product is suitable for your application

due to a very sloppy fit

76mm Straight Hose - 500mm

Boost Gauge Adaptor for Peugeot, MINI, Citroen and Renault Volkswagen > Caddy > All which would often not performA simple way to tap into your manifold on the N14 and N18 engine found in the Mini Cooper S Turbo, Citroen DS3 1. 6 Turbo, Peugeot 207 GTi, Peugeot 208 GTi and Peugeot RCZ THP156 and THP200. This adaptor utilises the (MAP) pressure sensor on the inlet manifold under the airbox. Simply remove the existing sensor, fit our adaptor and refit the original sensor into our adaptor. You will then have a vacuum boost connection suitable for 4mm tube or similar