Time-Sert 48196 M18x1.5 Taper Seat Cutter Short Shop By Category > Measurement>Tire Thread Depth Gauge 4 mm pin 526908-3

4 mm pin 526908-3

Failure to use GM-46091-5 will result in misdiagnosis of the intake and charge air cooler

Transfer Case : Mark LT : 2007

or Transfer Case model years 2015

The Mopar 9706A Rear Main Seal Installer is used in the following engine families and platforms:

Time-Sert 48196 M18x1.5 Taper Seat Cutter Short Shop By Category > Measurement>Tire Thread Depth Gauge 4 mm pin 526908-3Time Sert 48196 M18x1. 5 Taper Seat Cutter Short For use on some Taper Seat spark plug repairs that have very limited access to the hole. Note: you would need the tap found in the spark plug repair kit P N 4815 to use the tool. Tool will only cut the taper seat counterbore. Be aware the reduced step stop on this tool is very small so do not use too much down pressure. The reduced step stop approximately found 2mm from front of tool. For the Time Sert